T: 400 656 0655
News
Contact Us
Tel£º400-656-0655
+86-512-67991866
Fax£º+86-512-87661802
E-mail£ºservice@stq-cert.com
Address£ºBuilding one, 15 Yinzhu Road, Suzhou New District , China
Press Releases

EU amends FCM plastic regulation EU 10/2011

Time£º2017-05-10 15:26:42 

 On 29 April 2017, the EU Official Journal published a new Regulation (EU) 2017/752, amending and correcting regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food.

  The amendment added a new element Nickel to Annex II-Restriction on materials and articles, and the migration limit for Nickel is 0.02 mg/kg food simulant.


Before amendment

After amendment

Ba= 1 mg/kg

Co= 0,05 mg/kg

Cu= 5 mg/kg

Fe= 48 mg/kg

Li= 0,6 mg/kg

Mn= 0,6 mg/kg

Zn= 5 mg/kg

Al= 1 mg/kg

Ba= 1 mg/kg

Co= 0,05 mg/kg

Cu= 5 mg/kg

Fe= 48 mg/kg

Li= 0,6 mg/kg

Mn= 0,6 mg/kg

Zn= 5 mg/kg

Al= 1 mg/kg

Ni= 0.02mg/kg

 

 The amendment also added six new substances to Table 1 of Annex I-Union list of authorised monomers, other starting substances, macromolecules obtained from microbial fermentation, additives and polymer production aids. Combinations of simulants representative for different food types that should be used for overall migration testing are also clarified by the amendment.

  This regulation shall enter into force on 19 May 2017. And the provisions on the specific migration limits for Nickel shall apply from 19 May 2019.



Further Information: (EU) 2017/752



Home About Us Certification Business News Testing Process Laboratory Contact Us
STQ Testing Services Co.,Ltd. Copyright 2015-2016